Buy Genmark UM5 Undermount Gensets Online
Buy Genmark Undermount Gensets Online
Buy Genmark Undermount Genset Online
UNDERMOUNT UM5
The Genmark Undermount genset is designed for fixed / skeletal trailers and is positioned in the middle of the trailer. This model has adjustable beams, providing flexibility to mount the unit in the best position underneath your chassis. The Genmark Undermount Genset has the highest ground clearance in the field with up to 40cm (16inch). A great option of the Undermount is the possibility to mount the controller externally on the side of the chassis, this way the genset can easily be operated.
Genmark UM5 Undermount Gensets
Long Beach Off-coast Depot is your supplier of Genmark UM5 Undermount gensets for reefer containers. The Genmark Undermount UM5 genset is designed to keep the weight as low as possible but performance as high as possible. The Genmark UM5 Undermount is equipped with adjustable beams allowing you to find the best possible position underneath the chassis. This factor makes the Genmark UM5 Undermount genset an interesting genset for a container chassis. Genmark gensets are known for low fuel consumption and savings can rise to 20-25% in reference to competitors.
We make sure to provide a short delivery time for Genmark Undermount gensets
Below, the technical specifications for the Genmark um5Undermount genset.
Size:
1550 x760 x 760mm
Power:
17kW
Weight:
± 569kg
Decibel:
69dB
| Service Interval | 1000-1200 Hours |
| Controller | Automatic ”Pre-Heat” Start / Alarm List / Alarm Reset / Running Hours / Voltage Check |
| Efficiency | 94.3% |
| Remote Monitoring | Optional |
| Fuel Consumption | 20% less fuel compared with Carrier and ThermoKing |
| Tank Capacity | 100 Liter |
| Options | Winter Kit |
| Motor Type | Yanmar |
| Forklift Pockets | ✔ |
Specifications
Engine type + size
Yanmar 4TNV88-BIGV (Stage V)
2.286 liter
Outer dimensions
(cm/Inch) L: 121/47 x W: 122/48 x H: 76/30
Battery
12V 74Ah Cold: 680 EN
Certification
EMC, Lateral protection, Stage V
Oil Capacity
13,3 liter (max)
Average Fuel Consumption
2,20 liter per hour @ 380V/50Hz output
1,14 liter per hour when idle
Power
18,75 KVA @ 1500 RPM
24 KW Alternator
Weight
459 kg / 1.011 lb
Compatible Chassis
ASCA
Broshuis
D-TEC Portmaster
Krone FS-10
Renders Euro 925
Van Hool
Wielton
Kögel
Pacton
Dennison
Krone SDC 27
Krone SDC 27 ELTU4
Krone SDC 27 ELTU5 Plus
THE MOST FUEL EFFICIENT UNIT AVAILABLE
Designed for Fixed Chassis
Undermount Gensets are one of the most common types of gensets in the field. An undermount unit is often placed in the centre of a chassis. Unique about the Genmark UM5 Undermount is the size: it’s one of the smallest and lightest models available. This results in a maximised ground clearance, up to 40 centimetres! This reduces the risk of damaging the unit to a minimum. Our technical engineers at Genmark have found a solution to fit a genset on almost any type of chassis.
The standard Genmark Undermount comes with an external controller. The controller is designed by Genmark and, like the unit itself, produced in The Netherlands. The controller is built within a Pelican Case. Pelican products are well known for their quality and strength, it is produced with the most durable materials and up to the highest IP standards. The controller is positioned at the side of the chassis and therefore there is no need to crawl under the chassis to turn on the unit.
Thanks to the increased oil sump, containing 13,5 litres of oil (15W40), the maintenance interval is reduced to once every 1.000 hours, or once a year. The unit is designed in a way that the full service can be done without dismounting the unit form the chassis. The 4-cylinder Yanmar engine provides 18,9 kW which is equal to 25,7 hp at 1.500 rpm or 50 Hz, making our unit Stage 5 compliant.
Undermount Gensets
New and used undermount / underslung gensets of the brands Carrier, Genmark and Thermo King.
Long Beach Off-coast Depot offers new and used undermount gensets for reefer container chassis. These gensets have been designed to provide continuous power supply, to keep the refrigeration unit operational during road and/or rail transport and on remote locations with no power supply available.
We deliver undermount gensets for the brands Carrier, Genmark and ThermoKing. Undermount gensets are designed to be placed underneath a chassis and provides the possibility to power reefer containers.
WHY GENMARK?
Low fuel consumption
Fits under every truck
Low noise level
Low weight
1000 Hours service interval
Extra road clearance
OUR GENSETS
With a dedicated engineering team we know what really matters when it comes to producing Gensets. All Gensets are manufactured in the Netherlands, at our own production facility nearby the Port of Rotterdam. We pride ourselves with our flexibility; we can meet almost every demand. We keep in close touch with mayor chassis manufacturers. This way we can guarantee minimum height, safety and the most efficient way of mounting your genset.
Undermount UM5
Designed for Fixed Chassis
WHICH GENSET
FITS MY TRUCK / CHASSIS?
We know it can be difficult to choose the right genset for your business. To make this easier for you we have developed a special product configurator. This configurator can tell you which genset you need for your application, easy as that. Still not sure what to do? Just contact our sales department.
Reviews
There are no reviews yet.