Buy Generac 200 Amp Smart Transfer Switch Online
Buy Generac 200 Amp Transfer Switch Online
Generac 200-Amp Automatic Smart Transfer Switch w/ Power Management
Generac 200 A Single-Phase Automatic Transfer Switch
Generac RTSW200A3 2-Pole 1-Phase Automatic Smart Transfer Switch 120/240-Volt 200-Amp NEMA 3R
200-Amp 120/240 volt single-phase Smart transfer switch with service disconnect, which is housed in an aluminum NEMA/UL type 3R enclosure with electrostatically applied and baked powder paint
Transfer switch connects through the utility meter for easy installation
Heavy duty Generac contactor is a UL recognized Device, designed for years of service, the controller at the generator handles all the timing, sensing, exercising functions and transfer commands.Maximum Wattage:48000 Watts
Can be used in Tandem with Generac Smart Management modules, up to 8 more loads can be managed as well, providing the most installation efficient power Management options available
5-year limited warranty; Replacement for RTSW200A3
200 Amp Automatic Transfer Switch For Generac RXSW200A3 – NEMA 3R Aluminum Enclosure, Indoor/Outdoor Use With Power Management
The Generac Next Gen 200A automatic generator transfer switch is designed to reduce installation time and improve overall reliability for residential home standby systems. It features a factory-installed whole-home surge protection device (SPD), a fast-mount enclosure system, and a hardened fuse control module to support dependable automatic transfers when utility power is interrupted.
Generac RXSC200A3 200 Amp 120/240 Single-Phase NEMA 3R Smart Transfer Switch
Item #: RXSC200A3 by GENERAC POWER SYSTEMS
Generac Nexus Smart Switch 200 Amp Automatic Transfer Switch (ATS) w/Service Disconnect 120/240 Single Phase NEMA 3R Cabinet with Digital Load Management Technology.
Generac Automatic Transfer Switches are designed for use with single phase generators that utilize an Evolution or Nexus Controller. The 200 Amp open transition switch is available in single phase with a service equipment rated configurations. Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware.
- Service rated Generac automatic transfer switches are housed in an aluminum NEMA/UL type 3R enclosure, with electrostatically applied and baked powder paint
- Heavy duty Generac contactor is a UL recognized device, designed for years of service, the controller at the generator handles all the timing, sensing, exercising functions and transfer commands
- Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC controlled) loads with no additional hardware
- When used in tandem with smart management modules, up to 8 more loads can be managed as well, providing the most installation efficient power management options available
- Switch is covered by a 5 year limited warranty
200 Amp Automatic Transfer Switch with Power Management for Generac RXSW200A3
Fitment: Compatible replacement for Generac RXSW200A3, Evolution generator controllers, and Nexus generator controllers. Designed for 8–24 kW home standby generators.
Specifications: Single-phase operation with 200A capacity. Supports 120/240V, 1Ø, 60Hz systems. Features a 2-pole automatic transfer switch for whole-service applications. Housed in a NEMA 3R aluminum enclosure. Dimensions: 30″ x 13.5″ x 6.5″. Package includes 1 transfer switch, control rod, hook, and user manual.
Automatic Operation: The RXSW200A3 transfer switch automatically detects utility power outages and seamlessly transfers power to the standby generator—no manual action required. Ensures uninterrupted power while safeguarding essential systems and appliances.
Enhanced Safety & Weather Protection: Built with a NEMA 3R aluminum enclosure for secure outdoor installation. Features a bottom lock hole and an internal aluminum divider to reduce internal contact. Provides reliable protection against rain, wind, dust, rust, sunlight, and corrosion, ensuring stable performance in harsh environments.
Integrated Load Management: Equipped with advanced load management technology capable of handling up to four independent HVAC loads without additional accessories. This 200A, 120/240V single-phase switch offers overvoltage protection and allows manual disconnection of power for added safety in residential or commercial applications.
200A Service Entrance Rated Automatic Transfer Switch With Load Center
This Service Entrance rated transfer switch features a 20 space load center, a NEMA 3R enclosure, and is designed to create a flexible, cost effective install. Utilizing tandem breakers can increase the load center capacity to 40 circuits. Using the integrated load management technology, four individual HVAC loads can be managed with no additional accessories required.
This switch features a 5 year limited warranty.
Service Entrance Rated
This switch can act as your utility service entrance disconnect for installation in the United States, as the switch has a built in service disconnect breaker.
Intelligent Load Management
Manage up to four HVAC loads with no additonal hardware needed, providing a more efficient system, and allowing you to reduce the size of the generator needed to protect your home.
NEMA 3R Outdoor Rated Enclosure
Designed to give options as to whether to install indoors or outdoors, this enclosure protects the internal components of the switch from rain, snow, ice, and debris.
200 AMP Automatic Transfer Switch
The 200 amp, service-entrance-rated Smart Switch is an automatic transfer switch that can manage up to two central air conditioning units without additional hardware. The switch typically installs between the electric utility meter and the main service panel which allows the Smart Switch to select between utility power for normal operation or standby generator power for emergency operation.
- Reliable Power Management: Safeguard your home with this 200-Amp single phase Smart transfer switch designed for use with standby generators
- Seamless Power Transfer: Automatically switches power from the utility to the generator during outages and back to utility when power is restored
- Versatile Installation: Connects through the utility meter for easy setup and comes in a durable Steel NEMA 3R enclosure
- Heavy-Duty Construction: Features a UL recognized contactor for long-lasting performance and reliability
- Advanced Control: The integrated controller handles timing, sensing, exercising, and transfer commands, ensuring efficient power management. Compatible with Smart Management modules for expanded load management capabilities
- Easy Installation: recommends your new transfer switch to be installed by a certified and licensed electrician
200 Amp Automatic Transfer Switch w/Power Management Replacement for Generac RXSW200A3 120/240 V Single-Phase Transfer Switc, NEMA 3R Aluminum Enclosure for Indoor and Outdoor Use
How It Works:
1. By monitoring generator engine performance, the switch is able to identify when the generator approaches overload. At the appropriate time, the switch disconnects two air conditioners, typically the highest electrical load in the house.
2. After a 5-minute delay to allow for compressor bleed out, the switch brings the AC units back online one after the other with a 30-second delay in between. This is a standard capability in all Generac Smart Switches and does not require any additional components, unlike competitive transfer switches.
3. In addition, up to four other large 240V loads can be managed when the Smart Switch is used in conjunction with individual DLM modules.
• DLM modules are 50 Amps each and are housed in a NEMA 3R enclosure, giving the installer the option to install them either at the electrical panel or anywhere in-line indoors or outdoors between the electrical panel and the appliance.
• After the four loads are shed, they are brought back individually to assure DLM Module generator capability and eliminate the potential of overload.
The addition of an optional Power Management Starter Kit and Power Management Modules (PMM) allows the switch to control up to four additional high-demand loads such as well pumps, electric dryers, and electric water heaters using load shedding technology.
- AUTOMATIC SMART TRANSFER: Automatic generator transfer switch designed to keep your home powered by switching from utility to standby generator during outages
- SURGE PROTECTION: Factory-installed whole-home surge protection device (SPD) adds protection for connected home circuits during utility events
- 200A OPEN TRANSITION: Open-transition 200A design supports whole-home standby generator applications where a full-load transfer switch is required
- FAST-MOUNT INSTALL: Fast-mount enclosure system helps reduce install time across common residential exterior surfaces
- RELIABILITY MODULE: Hardened fuse control module is built for improved reliability in demanding standby power environments
- WHAT’S INCLUDED: Next Gen transfer switch enclosure with factory-installed SPD and control module plus installation documentation
| Item model number | RXSC200A3 |
| Style | 200-Amp |
| Current Rating | 200 Amps |
| Number of Items | 15 |
| Control Method | App |
| Terminal | Screw |
| Operating Voltage | 240 Volts |
| Number of Positions | 4 |
| Controller Type | Non-Service Rated |
| Unit Count | 1.0 Count |
| Connectivity Protocol | X-10 |
| Product Dimensions | 14.6 x 7.09 x 20 inches |
| Pattern Name | Switch |
| Mounting Type Wall Mount | Specification Met Compliant |
| Spare Part Availability Duration | 5 Years |
| Is Discontinued By Manufacturer | No |
| Manufacturer | Guardian |
| Item dimensions L x W x H | 14.6 x 7.09 x 20 inches |
| Circuit Type | 1-way |
| Connector Type | Screw |
| Item Weight | 19 pounds |
| Switch Type Automatic | Material Aluminum,Brass,Wood |
| Wattage | 2E+2 |
| Operation Mode | Automatic |
| Actuator Type | Rotary |
| Contact Type | Normally Open |
| Contact Material | Brass |
✔ Direct Replacement Solution – Exact fit for Generac 100A/200A Automatic Transfer Switches. Replaces part numbers: A0004499959 & 10000004183 For Generac 100A/200A ATS Malfunctioning load shed module issues The Smart AC Module Designed to monitor utility power and automatically start/stop generator sets during outages. Allows prioritization and shedding of non-essential loads to prevent overloading ✔ Compact & Ready to Install – Dimensions: 6.1 x 3.1 ,fits most enclosures Generac Generator Generac RXGW20SHA3 200-Amp Automatic Smart Transfer Switch & 20-Circuit Load Cen Automatic Transfer Switch 100 Amp
New Generac 200 Amp Automatic Smart Transfer Switch
Generac Automatic 200 Amp Service Rated Smart Transfer Switch
Alright, let’s talk about keeping the power on when the grid goes down. This 200 Amp Automatic Transfer Switch is a solid replacement for the Generac RXSW200A3, and it’s built to handle some serious electrical loads. The switch automatically detects when your main power cuts out and seamlessly switches over to your backup generator—no manual intervention needed. That means your lights, fridge, and essentials stay running without a hitch. It’s housed in a NEMA 3R-rated aluminum enclosure, which is corrosion-resistant and weatherproof, so you can install it indoors or outdoors without worry.
The smart power management feature optimizes energy usage, making sure your generator isn’t overloaded and your equipment stays protected. Rated at 200 amps, it’s perfect for both residential and commercial setups where reliable backup power is a must. It’s compatible with Generac’s Evolution and Nexus generator controllers, so if you’ve got one of those systems, this switch will integrate smoothly. Installation is pretty straightforward with the included instructions, and once it’s in place, it’s low-maintenance and built to last.
If you’re tired of power outages disrupting your life or business, this transfer switch is a reliable solution that offers peace of mind. Just set it up, and let it do its thing—you won’t even notice when the switch happens, but you’ll definitely appreciate having electricity when everyone else is in the dark.
Generac Guardian Home Standby Generators—the best-selling home backup generators in the country—install just 18 inches from the home and include Mobile Link Wireless Remote Monitoring.
Generac’s 22-kilowatt Guardian standby generator provides quiet, dependable power while using less fuel than a comparable 20kW unit and costs less too. 
Generac Liquid-Cooled Protector Gas, Protector Diesel, and Commercial Series Standby Generators add the reliability of a automotive-style engine and more power for larger homes, estates, agricultural operations, and commercial applications.
Generac PWRcell Whole Home Solar Power with Automatic Transfer Switch and Battery Storage System Powers the Entire Main Circuit Breaker Panel for Power All Day and All Night. 
The PWRview Smart Phone displays energy usage in real time for a better understanding of your home energy use and the power and knowledge to change how and when you use power for a lifetime of energy savings.
Reviews
There are no reviews yet.