Buy 1/8 Ton RAZE Medium Duty Foundationless Jib Crane Online
1/8 Ton RAZE Medium Duty Foundationless Jib Crane for Sale
Medium duty base mounted jib cranes are engineered and designed for an allowable “foundationless” mount.
Freestanding 360 degree rotating jib crane. Mounts to floor using epoxy anchor bolt system and recommended foundation with as little as 6″ of concrete, depending on speciation’s of the crane.
The Model 350F Jib Crane is designed with safety features to prevent removal of head under accidental impact.
Boom is an American standard I Beam or wide flange beam, that conforms to AISC and ASTM standards. Girder is equipped with removable end stops for quick trolley installation and maintenance. Bearing housing is rigidly mounted on boom.
The mast consists of a heavy pipe design to withstand bending stresses without undue deflection to boom. Assembly is jig welded to insure vertical alignment.
Buy 1/8 Ton RAZE Medium Duty Foundationless Jib Crane
ALL Lift 1/8 Ton Foundationless Jib Cranes have a 250 LB capacity and do not require a pre-poured concrete foundation (see existing foundation requirements below). All Lift cranes can be lagged to just about any concrete surface and are ideal for use in open areas serving multiple work stations at one time. All Lift floor mounted jib cranes feature a rolled steel I-beam with tapered flange for smooth trolley travel. I-beam rotates 360° on its base. Removable safety end stops limit trolley travel. 26” diameter base and 22” bolt circle with 6 bolt holes measuring 1¼“ dia. each. ALL Lift Foundationless Jib Cranes are great for use in machine shops, loading docks, assembly operations, and anywhere a floor mounted jib crane is needed.
Jib crane head is constructed of two heavy sides and reinforcing plates to permit balancing of stress. Lower roller assembly is mounted in a heavy duty machined carriage weldment. Assembly is supported by adjustable tension bolts to permit field adjustment, and to insure even pressure of the rollers on the mast. Roller bearings are furnished in each machined roller and are mounted to the frame through removable steel axles with grease fittings. Top bearing is a tapered roller radial thrust bearing.
The freestanding foundationless jib crane is an economical and simple way to increase your material handling efficiency to your manufacturing, assembly or maintenance processes. The base plate is designed to allow the jib to be anchored to most existing concrete floors, therefore eliminating the requirement for an expensive and invasive footing.
- Capacity: 1/8 ton (250 lbs.)
- Span: 8′-0″
- Height Under Beam: 10′-0″
- Rotation: 360°
Foundationless Cranes
Foundationless jib cranes provide a lifting solution that is much easier to install than other jib cranes. It doesn’t require pre-poured foundations and can easily be bolted onto any reinforced concrete surface thicker than 6 inches. Foundationless workstation jib cranes can easily be relocated to other parts of your facility as no foundation is required.
Foundationless jibs give you greater flexibility in your initial install location. It’s also easy to relocate a jib when there’s no poured foundation. When your operation changes, your Gorbel foundationless jib can keep up with the change.
At Long Beach Off-Coast Depot, we carry a large inventory of foundationless jib cranes from the world’s leading manufacturers, such as Advantage and Raze. All units can be customized to meet your unique application and space requirements, with various spans, beam heights, and accessories available. Our team of experts is always available to help you source the best solution for your application requirements.
Specifications:
- Capacity: 250 LBS
- W Type I-Beam with various sized flange widths – see chart below
- I-Beam spans are 6′, 8′, 10′, 12′ and 14′
- 360° I-beam boom rotation
- 26” dia. base and 22” bolt circle with 6 bolt holes measuring 1¼“ dia. each
- All steel construction
- Limited Warranty: 3 Years
- Existing concrete must be a minimum of 6” thick reinforced with a minimum 3,000 psi (5 bag mix), soil pressure must support 2,500 psi
- Concrete in and around the area (6’ x 6’) of the base plate must be free of cracks and must be in good condition.
- All foundations should be checked by a structural engineer
Foundationless jib cranes do not require a pre-poured concrete foundation. These cranes can be lagged to most concrete surfaces, and can be moved and re-installed elsewhere if needed, making them extremely versatile. Foundationless jib cranes have 360 degree rotation of the I-beam, making them ideal for use in multiple work stations at the same time. At Long Beach Off-Coast Depot, we have a full range of foundationless jib cranes to meet all your needs.
- All Lift Articulating Jib Cranes feature a knuckle beam for even greater flexibility and have total beam spans from 8’ to 16’.
- Spanco jib cranes are available with I-beam spans from 8’ to 13’ and with capacities ranging from 500 LBS to half a ton.
- Workstation jib cranes include enclosed track and trolley, making them simple to install and use, without the need for additional equipment. These foundationless jib cranes can be attached to almost any concrete surface.
- 1 Ton Jib cranes are heavy duty jib cranes which can handle up to 2,000 LBS of material and have I-Beam spans ranging from 8’ to 16’.
- 1000 LB jib cranes have a maximum capacity of half a ton, while 500 LB jib cranes can handle a quarter of a ton, for lighter applications.
Foundationless jib cranes are ideal for smaller work areas, where items being lifted are lighter in weight. The 360 degree rotation of the I-beam means that these cranes cover a large area for lifting, enabling them to be used for many different applications.
Whatever your lifting needs, you will find the right equipment at HOF Equipment Company. Browse our selection of foundationless jib cranes on our website, where one of our consultants will be happy to advise you.
What are the benefits of foundationless jib cranes?
Foundationless workstation jib cranes provide a flexible lifting and handling solution for a wide range of machining and assembly applications. As it is foundationless, a jib crane can be relocated in your facility if the nature of your operations or space requirements changes.
Some of the main benefits include:
- Robust design, built for long service
- Seamless 360-degree rotation of l-beam
- Savings of time and money on installation costs
- Easy to operate and maintain
- Can handle loads from 250 lbs up to 1 ton
- Superior load positioning
The Long Beach Off-Coast Depot Difference
At Long Beach Off-Coast Depot, we supply foundationless jib cranes from the world’s leading manufacturers at highly competitive prices. Our mission is to take away the hassle of sourcing a new crane or crane components. Our team of experts is always available to answer your questions, and our user-friendly website provides a hassle-free way to browse, compare, and choose options that best meet your needs.
Contact us today to help you source the best option for your business.
Reviews
There are no reviews yet.